Model
CGN-208D
Replacement Of Die Roll
5-8mins (for beginners)
Production Capacity
10000-25000 capsules/hour (depending on capsule type)
Applicable Capsule Types
000#, 00L#, 00#, 0#, 1#, 2#, 3#, 4#, Mechanism standard capsules
Filling Material
Without sticky and wet powder, small granules
Total Power
4.0kw
Air Pressure
0.03m^3/min 0.6Mpa
Machine Dimension
1140*700*1630mm
Packing Dimension
1650*800*1750mm
Net Weight
350kg
Gross Weight
380kg
This equipment is suitable ...
Fully automatic Straight-bottle tablet filling machine realizes electromechanical integration. Automatic bottle unscramble, push tablet, cap unscramble and cap pressing. The degree of automation is the first in China. The machine adopts touch screen control, is simple to operate and easy to maintain.
Capacity
60-80bpm
Counting Accuracy
≥99%
Applied Bottle
Tube Bottle
Press Cover Rate
≥99%
Counting Type
Continuous
Main Motor Power
1.5KW
...
The capsules in the material hopper will continually upright get into sending device in dividing device when machine start to work. In the effect of direction push off and sending device, each capsule will be placed into module bores of first working position、second working position and third working position in the way of cap up body down, meanwhile, vacuum separation system will separate cap and body. The fourth working position is a sheave reserved position for buffer. In t...
1.The main components of the electric control cabinet are imported components from abroad, PLC adopts original Siemens products, and human-machine interface adopts Taisiemens 10-inch series color touch screen.
2. Low voltage electrical appliances use SIEMENS and Schneider and other international famous brand products.
3. Frequency converter uses SIEMENS products.
4. Turbine vortex rod adopts high precision products of Tianjin Huachang brand.
5. Bearing series all adopt NSK prod...
The coating machine is realizes tablet coating by rotating the pot clockwise. During operation, the tablets are turned, rubbed, and grind under the action of the streamlined deflector agitator, which avoids the falling and collision of the tablets from a high place, eliminates debris and edge knocking, and improves the yield. Spray the coating film or syrup with a spray gun to distribute the film or syrup evenly over the entire tablet.At the same time, in the negative pressure state, the gas ...
High speed automatic bottle unscrambler is one member of our plastic bottle packing line. It has high speed, suitability to other machine and is able to supply bottle to two producing lines simultaneously through two separate conveyors.
Model
GLP-800
Capacity
80-200bottle/min
Turn Table Diameter
Φ600-Φ800mm
Bottle Diameter
Φ25-Φ75mm
Bottle Height
30-120mm
Power Supply
3P 380V 50HZ
Power
2KW
Dimension (L*W*H)mm
3000×1300×1350
The au...
■The heating plate at forming station is opened and closed automatically, and the machine will delay to start until the forming material reaches set temperature, thus reducing the waste of material;
■Pneumatic cushion heating mechanism, the upper sealing molds (web plate) is driven by a pneumatic cylinder to rise up when power off, avoiding the blister package deformation caused by heat radiation during the machine stop;
■Roll heat sealing mechanism, the linear contact between the heat seal r...
It’s suitable for filling powder and granular material in pharmacy and health food industry.
This machine has independent empty capsule feeding station, powder feeding station and capsule closing station. The medium process needs to be processed by hand. The machine adopts variable speed control, the operation is very easy and simple, and the powder material feed correctly. The machine body and working table adopt S.S. material; meet the sanitary requirement of pharmacy.
...
Composition and function:
1.Cap feeder: Adopt vibrating plate is used to automatic unscrambling the cap and adjust the direction to automatic feed it into the capping station.
2.Tablet feeder: Adopt vibrating plate to automatic unscrambling the tablets and feed them into the bottling mechanism
3.Bottle feeder: Automatic unscrambling the bottles and send them to the bottling mechanism.
4.Bottling mechanism: Automatic count and arrange the tablets into each track and send them into the bottle
...
The capsules in the material hopper will continually upright get into sending device in dividing device when machine start to work. In the effect of direction push off and sending device, each capsule will be placed into module bores of first working position、second working position and third working position in the way of cap up body down, meanwhile, vacuum separation system will separate cap and body. The fourth working position is a sheave reserved position for buffer. In t...